Cement
We supply cement according to TS, EN, BS and ASTM Standards. Packaging is available in 50 kg kraft/PP Bags, Jumbo Bags or Bulk as per customer’s requirement.
Cem I 42,5 R
Portland cement is a hydraulic binder obtained by grinding portland cement clinker after adding a little amount of limestone as a setting regulating agent. It has a high strength gain and high strength as it contains a high amount of clinker. This product is for general use. It is a type of cement used in concrete manufacturing where high-strength concrete is required and the first strength is to be high.
Cem I 52,5 R (White)
Superior quality white cement: Minimum 85% whiteness ratio for general use and structures for aesthetic purposes
Cem II White
Blended white cement: Minimum 82% whiteness ratio for general use and structures for aesthetic purposes
Cem II
Generally used in areas where blended cement is used and higher strength is required, in construction of pipe culverts, special project concrete and in production of building chemicals.
Cem III
Blast Furnace Slag Cement: In coast and harbor constructions, offshore structures, waste water plants, foundation piles, canalettes, dams, concrete or reinforced concrete underground water pipes, industrial grounds under sulphate effect, treatment plants, tunnel linings, in constructions for general purpose and in mass concrete requiring low heat of hydration.
Cem IV
It is generally used in dams, plaster and masonry mortar, flumes, treatment plants, mass concrete casting, paving concrete and production of building chemicals.
Cem IV-SR
It is generally used in dams, plaster and masonry mortar, flumes, treatment plants, mass concrete casting, paving concrete and production of building chemicals.
Cem V
It is generally used in dams, plaster and masonry mortar, flumes, treatment plants, mass concrete casting, paving concrete and production of building chemicals.
Cem I – SR
It is generally used in dams, plaster and masonry mortar, flumes, treatment plants, mass concrete casting, paving concrete and production of building chemicals.
Api Well Cement
Class G; Type HSR
API Well Cement, which can be used under severe conditions like 260 degrees celsius and 20.000 psi, shows excellent workability and mechanical properties on drilling applications. This is a special type of cement which does not hardens to a depth of 6.000 meter and it has appropriate strength properties for drilling procedures under high temperature and high pressure.